YGE Optocoupler Opto-coupler
Optocouplers - Module
For converting BEC controllers to electrical isolation between receiver and motor circuit. Highly recommended for currents greater than 40A, and from 4 LiPo or 12 cell NiCd / NiMh. With the use of the module, a receiver battery switch harness is required. The receiving system is no longer from the controller, but only supplied by the receiver battery.
* Higher Security
* best noise suppression
* no risk for deep discharge battery flight
* almost no load on the BEC, thus less heat in the controller
* Strengthening of the receiver signal