SG509 - GOBLIN 500 SPORT COMBO WHITE/RED

DESCRIPTION

SG509 - Goblin 500 Sport Combo White/Red

Specifications:

After the great success of Goblin 500, here the Goblin 500 Sport The design totally changes to follow the family feeling with the Goblin 380. Ability to use medium and full-size servos 2 sets of Main blades 2 sets of Tail blades The structural plates are now made of a plastic material Zytel70G33L. This change ensures a reduction of 48 grams in weight. Main gear CNC H0423 (aluminum/delrin) in the basic kit New Swashplate with high quality spherical bearing Landing gear with extra width Boom obtained with different technology, 25 grams less In additional other small details... An important update that changes the whole model! General Specifications: Main rotor diameter:  1136 mm Main blade length: 500mm Tail blade length: 80 mm Weight including electronics: 1880 g (excluding batteries). 18T motor pulley included Electronic Specifications: Cyclic Servos: Mid and Standard size (36 and 40 mm) Tail Servo: Standards size 40mm Typical speed controller: 100A Maximum motor size: 52 mm diameter, 58 mm height Flight Battery: 6S 3300/4500 mAh; Battery compartment: 50x54x180mm Kit Includes: 18T motor pulley (other pulley sizes available) 2 battery trays 500 mm main blades (2 sets) 80 mm tail blades (2 sets) Mini cyclic servo KST DS589MG (3pcs) Full size tail servo KST DS525MG (1pc) ESC HobbyWing 100A V3 (1pc) Quantum motor 4120-1200KV (1pc) Carbon fiber servo support for KST DS589MG (1 set) HA050 SAB HELIDIVISION Futaba Servo Horn (1 set)

The following motor pulleys are available:

16T Pulley (P/N 0215-16-S) Ratio 10.33:1 17T Pulley (P/N H0215-17-S) Ratio 9.72:1 18T Pulley (P/N H0215-18-S) Ratio 9.18:1 19T Pulley (P/N H0215-19-S) Ratio 8.7:1 20T Pulley (P/N H0215-20-S) Ratio 8.26:1

21T Pulley (P/N H0215-21-S) Ratio 7.87:1 22T Pulley (P/N H0215-22-S) Ratio 7.51:1 23T Pulley (P/N H0215-23-S) Ratio 7.19:1 24T Pulley (P/N H0215-24-S) Ratio 6.91:1

    All these motor pulleys are for a 6 mm motor shaft. Each pulley includes an adapter for 5 mm motor shafts.

Simple and effective design	HPS Head System	Dampened tail system for increased vibration tolerance	100% full Carbon Boom (In White and Yellow color)

Double main / tail blade in the kits	Cnc main gear	Main plate and servo support in technopolymer Zytel	Swashplate with commercil aspherical beraing

Landing gear	All servo sizes compartible	Battery tray	Break away Nylon screws

HM046. Carry Bag. Allows for safe transport and protects from minor bumps and scratches	Upgrade Landing Gear	Swash Leveler	H0489-K. HPS3 Head

You may also like...

• 105 MM CYCLONE CARBON FIBER TAIL BLADES $44.99 AUD
• 105TBS 700 Tail Blades $42.99 AUD
• 115 MM CYCLONE CARBON FIBER TAIL BLADES OUT OF STOCK
• 1153TBS SAB TAIL BLADE 1153TBS $69.99 AUD