OXY 2 - 190 Sport Combo

Oxy

$469.99 AUD $510.99 AUD

Share:

OXY2-190S X1 $206.99

TA-75C-850-3S1P-XT30 X1 $19.99

LX2614 - Hobbywing 25amp ESC X1 $40.99

LX2395 - EOX 1611 - 5500kv Motor X1 $62.99

LX1817 - Lynx Servo DS-895-HV X3 $151.99

LX2616 - Tail Servo Blue Arrow H0988UHS X1 $27.99

 TOTAL   $  510.94

 

OXY2 190 – SPORT EDITION

Specifications

- Length: 415mm Height: 138mm Width: 70mm

- Main rotor blade length: 190 mm

- Tail blade length: 38mm to 41mm

- Main gear: 113T 0.4 Mod – Straight Tooth

- Wide head speed range: 3500 for sport flying up to 6000 for insane 3D

- Tail gear ratio 3.437 (16T pulley) , optional Tail Shaft Pulley 15T for low Head Speed set up

- Approximate RTF weight: 320g with 3s 800mAh battery– suitable for 3 minutes of intense 3D at 5500rpm

 OXY2 190 – SPORT EDITION KIT CONTENTS:

1 x Oxy 2 190 Sport Kit with DFC Head System.

1 x Oxy 2 190 Sport Lexan Pre-Painted Canopy – Multi Color Schema.

1 x set Oxy Carbon Plastic Main Blade 190 mm – Black Color.

1 x set Oxy Plastic Main Blade 190 mm – Orange Color.

1 x set Oxy Plastic Tail Blade 38mm, Back Color.

1 x set Oxy Plastic Tail Blade 38mm, Orange Color.

1 x set Colored Tail Fin Sticker (Yellow – White – Orange - Green)

1 x Swash Plate / Tail Pitch Slider Lever Tools with Zero Pitch function

1 x Serial Number Card – Registration Serial Number in www.oxyheli.com , every 3 month we will extract a serial number from our registered data base that win 200 usd coupon to spend in our web site Lynx Heli Innovations www.lynxheli.com

TATTU 850MAH 11.1V 45C 3S1P LIPO BATTERY PACK WITH XT30 PLUG

  • Minimum Capacity: 850mAh
  • Configuration: 3S1P / 11.1V / 3 Cells
  • Discharge Rate: 45C
  • Max Burst discharge Rate: 90C
  • Net Weight(±20g): 76g
  • Dimensions: 60mm Length x 30mm Width x 22mm Height
  • Balancer Connector Type:JST-XHR

HOBBYWING PLATINUM V4 25A ESC (3-6S)

Specifications

Cont./Peak Current : 25A/40A

Input Voltage : 3-6S Lipo

BEC : Switch-mode,6V / 7.4V Adjustable ; Cont./Peak : 3A/7A 

Input / Output Wires : Black & Red 16AWG input wires / Black 16AWG output wires

Separate Programming Port : Short Black & Red & White wires with JST connecters, For connecting LCD Program Box or WIFI Express

Size / Weight : 47*22*10mm / 27g

Application : 250Class electric Helicopter (Main Blades: 200-300mm),electric fixed-wing ,multi-rotor.

 

LX2395 - EOX 1611 - 5500 KV MOTOR

 EOX-1611 developed by Lynx, this motors is perhaps the ultimate  Oxy2  motor upgrade.

Featuring a parallel 0.5mm diameter wiring coil, manually assembly for the best efficiency, power and cool running.

High temperature rating Neodymium magnet and high quality material and component graduate EOX motor by Lynx a Limit Edition.

 

The EOX-1611 designed specifically for the Oxy2 with 5500KV and three Radial Bearing that support the shaft.

 

Designed in order to provide the maximum power when with 3S battery pack.

 

Overall the 1611 is the best weight / power compromize  for your OXY 2.

 

 

TECHNICAL SPECIFICATION:

 

Motor Kv

5500KV

Max Lipo Cell

3 s

Max Continuous Current

30 A

Max Continuous Power

390 W

Stator Diameter

16 mm

Stator Length

11 mm

No. of Stator Arms

9

No. Magnet Poles

6

Parallel Wire Diam.

0.5 mm

Weight

23.6g

Outside Diameter

20.5mm

Body Length

18.5mm

Shaft Diameter and Support

Inner 3mm / Pinion 2 mm (Triple Bearing)

Suggested ESC

20 - 25 A

Motor Timing

5deg

Drive Frequency

8kHz

 

PACKING LIST:

1 x EOX 1611 Motor with 2 mm Connector Plug

2 x Hex Cup Screw m2x5

 

LX1817 - Lynx Servo DS-895-HV_Aluminum CNC Case - 3PC Set

Lynx Heli Innovations introduce the first Metal Case Servo for 180 CFX.

Using the Lynx LX9004 - Lynx Servo DS-895-HV, we build a special Cover and Rear Case in order to increase global Servo performance.

After many pilot report and crash we decided to improve the standard Lynx DS-895-HV Servo with precision CNC Servo Cover and Rear Case.

With this Metal Case, servo become more precise and robust in case of crash, gear mesh become very precise and cannot move as can upend on plastic case for wear or crash shock.

The other important feature is the incredible heat-sink effect of CNC Rear Cover. Thanks a special design the motor case is in direct connection with Rear Cover keeping the motor temperature under dangerous values, increasing the global performance and the spam-life.

Details and design combined with strength, durability, accurate CNC tolerances, finish, and most important lightweight and features, this Servo Case will increase Servo performance and assure flight precision.

Lynx upgrade design: the new frontier of lightweight and high precision upgrade parts for micro helicopters.

 

DS-895-HV SERVO FEATURES:

- Direct replacement for the standard 180 CFX cyclic servo.

- Servo Case Material: CNC Aluminum Cover and Rear Case with Techno Polymer Core.

- Full Metal Gear Digital Precision Servo (Brass and Aluminum Alloy)

- Input (V-in): 4.5 to 6 V

- Frequency: 333 Hz

- Neutral Point: 1500μs

- Speed: 0.06 sec / 60° at 4.5V

              0.05 sec / 60° at 6 V

- Stall Torque: 1.40 kgcm at 4.5V

                      1.80 kgcm at 6 V

- Dimension: 20.05 x 8.35 x 19.70 mm

- Connector JST-1.50 (180CFX standard)

- Weight including 150 mm cable connector: 6.50g

- Output Gear support: Radial bearing 4x7 W2

- Servo Arms: 4 type included + LX1097 - Micro Servo Gear Saver Arm preinstalled at zero-degree pitch.

 

PACKING LIST:

1 x Set of 3 x DS-895-HV Aluminum Case Servos.

 

LX2616 - Tail servo Blue Arrow H0988UHS X1

 

Our Brands