SG380 - SAB GOBLIN 380 RED/BLACK (with 380mm Black Line Main Blades)
The Goblin 380 provides incredible performance, reliability and simplicity with the unique and innovative Goblin look you are accustomed to!


General Specifications
|
Electronic Specifications |
- Main rotor diameter: 856 mmô˜
- Main blade length: 380mm
- Tail rotor diameter: 196 mm
- Tail blade length: 70 mm
- Main shaft diameter: 8 mm
- Tail shaft diameter: 5 mm
- Weight including electronics: 1075 g (excluding batteries).
ô˜
Kit Includes:
- 21T motor pulley (other motor pulleys available)
- BL 380 3D mm main blades
- 70 mm tail blades
- 2 Battery tray with straps and double tape
|
-
Cyclic Servos: Micro size 23mm
- General and 3D flight: ô˜MKSô˜ô˜ DS92A+,ô˜ Savox SH-0255MG
- General and Extreme flight: ô˜BK 3001HV,ô˜ SAVOX SV-1232MG,ô˜ MKS HV93,ô˜ MKS DS95
-
Tail Servo: Mini size 35 mm
- General and 3D flight:ô˜ Savox SH-1257MG, ô˜Futaba S9257
- General and Extreme flight: ô˜BK 5005HV, ô˜MKS HV9780
-
Typical speed controller:
- General and 3D flight: Kontronik Koby 70, YGE 60 LV, CC Lite 75
- General and Extreme flight: ô˜Kontronik Koby 90 - Jive 80LV , ô˜YGE 90 LV, ô˜CC Lite 100
-
Maximum motor size: 41 mm diameter, 41 mm height
- General and 3D flight: X-Nova 2820-890,ô˜ Scorpion HK 3014-900, ô˜Quantum 2820-880
-
General and Extreme flight: ô˜ô˜
- Kontronik Pyro 380-9, ô˜X-Nova 3215-930,ô˜
- Scorpion HK 3020-1000, ô˜KDE 500XF-950.
-
Battery compartment: 44x44x130mm
- ô˜6S 1500/2600 mAh.ô˜ For perfect 3D flight 6S-1800 mAh
|
The following motor pulleys are available: |
- H0501-19-S - 19T Pinion = ratio 6.3:1ô˜
- H0501-20-S - 20T Pinion = ratio 6:1
- H0501-21-S - 21T Pinion = ratio 5.7:1ô˜
|
- H0501-22-S - 22T Pinion = ratio 5.5:1
- H0501-23-S - 23T Pinion = ratio 5.2:1
- H0501-24-S - 24T Pinion = ratio 5:1
|
All these motor pulleys are for a 5 mm motor shaft.
 |
 |
 |
 |
|
- Single stage transmission;
- Heat tolerant primary drive belt;
- Motor Belt Gates GT3 9 mm.
|
- HPS (High Precision Head System);
- 8mm high strength steel main shaft;
- 5mm high strength steel spindle shaft;
- New head with 2-piece blade grip preserves grips in the event of a crash.
|
- Direct and geometrically correct servo placement;
- Micro size cyclic servos.
|
 |
 |
 |
 |
|
|
- Plenty of room for electronic components.
|
|
 |
 |
 |
 |
- Quick release battery tray system
|
- Big battery compartment;
- wide selection of batteries with different capacities 6S 1500/2600 mAh.
|
- Carbon fiber boom for very lightweight.
|
- Nylon bolt break-away system to preserve the boom during a crash.
|
 |
 |
 |
 |
- Dampened tail system for increased vibration tolerance;
- Aluminum tail case for increased stiffness.
- 5mm high strength Tail shaft
|
- Carbon fiber tail push rod hidden inside the boom for an aesthetically pleasing, unique design.
|
- Landing gear Goblin Speed style.
|
- Some example Setup configurations.
|


ô˜

