Zu Produktinformationen springen
Description
The RadioMaster RP2 V2 is a tiny open-source ExpressLRS 2.4GHz receiver with a built-in ceramic antenna. At just 0.55g it slips into almost anything, from whoops and FPV quads to helicopters and fixed-wing models.
Built-in Wi-Fi lets you update the firmware and change settings through the WebUI from your PC or phone. The low-latency, high-refresh RF module suits both FPV racing and long range flying.
Features
- Improved PCB layout for better heat dissipation
- Upgraded rigid antenna that is tougher and performs better
- LED on the top of the PCB
- Bigger, easier-to-solder pads
Specifications
- Item: RP2 Nano ExpressLRS 2.4GHz receiver
- Type: ISM
- Antenna: on-board SMT antenna
- Maximum refresh rate: 500Hz / F1000Hz
- Minimum refresh rate: 25Hz
- Working voltage: 5V
- Weight: 0.55g
- Size: 13 x 11 x 7mm
- Firmware: ExpressLRS v2.4 pre-installed
- Firmware target: RadioMaster RP1/2 2400 RX
- Bus interface: CRSF
TCXO (temperature compensated crystal oscillator)
The TCXO keeps the receiver frequency accurate and stable as the temperature changes. That means consistent, reliable signal in hot or cold conditions, with less frequency drift over time. Learn more about the TCXO.
Includes:
1x RP2 ExpressLRS 2.4GHz Nano Receiver
1x CRSF wire
1x User manual